How to Pass a DRP Facility Audit Before You Are Enrolled
The pre-enrollment site visit is the first time a decision-maker sees your operation rather than your paperwork. It is a different event from the audits enrolled shops face. Here is what gets checked and how to be ready.
This Is Not the Same as an In-Program Audit
Enrolled shops face periodic audits that check compliance with an agreement already in force: scorecard performance, documentation standards, and process adherence against known targets.
The pre-enrollment visit is a different event with a different question. Nobody is measuring you against a scorecard yet. The visit exists to answer one thing: does the operation match what the application claimed, and would we be comfortable sending policyholders here.
That difference changes how you prepare. An in-program audit rewards clean records against a defined standard. A pre-enrollment visit rewards an operation that visibly runs well, because the assessor is forming a judgment rather than scoring a checklist.
Key Insight
The assessor is deciding whether they would send their own policyholder here. Every part of the visit is downstream of that question, including the parts that are not on any checklist.
Equipment Verification Against What You Declared
The most concrete part of the visit is confirming that the capability you listed actually exists and works.
Expect them to look at:
- Frame and measuring equipment, and whether it is calibrated and in use
- Paint booth condition, filtration, and operating state
- Welding equipment appropriate to modern substrates
- Aluminum capability and separation if you claimed it
- Scan tools and their coverage
- Calibration capability, or evidence of the documented partner arrangement
- Lifts and specialty tooling
The failure mode here is entirely self-inflicted: declaring capability you do not have. An honest gap disclosed in the application is manageable. The same gap discovered on site reads as misrepresentation and generally ends the process.
If you listed a calibration partner rather than in-house capability, have the agreement and recent calibration reports available. A named partner you can evidence is a legitimate answer. A vague claim that you sublet it somewhere is not.
Facility Condition and What It Signals
"They cannot watch you complete a repair. They can see whether this looks like a place where one would be completed carefully."
Shop condition carries more weight than owners expect, because it is the only direct evidence of process discipline available in a single visit.
What gets noticed:
- Whether the floor is organized or chaotic
- Whether vehicles in process are protected and covered appropriately
- Whether parts are staged against specific repair orders or piled generally
- Whether the customer-facing area is clean and professional
- Safety equipment, signage, and visible compliance
- Hazardous material handling and storage
- Whether technicians are working or standing around
The underlying logic is that an assessor cannot watch you complete a repair. What they can see is whether the environment looks like one where a repair would be completed carefully. A disorganized floor undermines every claim the application made about process.
This is also the most controllable part of the visit. It requires attention rather than capital.
Process and Workflow Questions
Expect to walk through how a vehicle moves through the shop, and to answer follow-up questions on the spot.
Commonly asked:
- How a vehicle is received and what gets documented at intake
- When and how photos are taken through the repair
- How teardown findings become a supplement
- Who communicates with the customer, and how often
- Who communicates with the appraiser
- How parts are ordered, received, and verified
- How quality control happens before delivery
- How you track where every vehicle stands
The answer that lands well is specific and consistent, and the strongest version is one the assessor can verify by asking someone else. If the owner describes a process and a technician describes a different one, the process is aspirational.
Brief the team beforehand. Not with a script, which is transparent, but by making sure everyone can describe how the shop actually works.
Have Files Ready to Open
The visit frequently includes looking at live work, and often at specific repair orders chosen by the assessor rather than by you.
Be able to open any current job and show:
- Intake photos and documented pre-existing condition
- The estimate and any supplements in clear sequence
- Teardown findings tied to the operations requested
- Parts sourcing with category and price
- Scan reports and calibration documentation where applicable
- Signed authorizations
- The communication record with customer and carrier
The test is not whether the file is perfect. It is whether you can produce it immediately for a job picked at random. A shop that has to search a phone, an inbox, and a filing cabinet to assemble one file has answered the question regardless of what the file eventually contains.
This is where a single system that holds photos, supplements, authorizations, and communications against the claim record does the most visible work, because opening it in front of an assessor is the demonstration.
Important
Do not prepare a handful of showcase files. Assessors frequently pick the repair order themselves, precisely to see the normal standard rather than the curated one.
Preparing Without Staging
There is a meaningful difference between preparing and staging, and experienced assessors can tell.
Legitimate preparation:
- Deep clean the facility and keep it that way
- Confirm equipment is calibrated, serviced, and functional
- Ensure certifications and insurance are current and to hand
- Brief the team on what is happening and when
- Make sure any live job can be opened in seconds
- Have your capability summary and documentation ready
What reads badly:
- A shop that is visibly clean for one day, with the wear pattern showing otherwise
- Staff who have obviously been coached to give specific answers
- Equipment brought in temporarily
- An unusually quiet shop that was clearly slowed down for the visit
The most persuasive version of the visit is a normal busy day in a well-run shop. That is also the version you cannot fake, which is why the preparation that matters happens in the months before rather than the night before.
The Conversation Is Part of the Assessment
The site visit is usually the first extended contact with someone who influences the decision, and the discussion carries real weight.
Worth being ready to discuss:
- Your capacity and what volume you can genuinely absorb
- The geography you serve and where you think coverage is thin
- Your cycle time and how you measure it
- How you handle a disagreement with an appraiser
- What repair types you are strongest at
- Staffing stability and technician tenure
Answer the capacity question honestly. Overstating what you can absorb produces a program relationship that fails within months, and a struggling new shop damages the relationship more than a modest but reliable one.
It is also reasonable to ask your own questions: how assignments are distributed, how performance is measured, what the ramp looks like. Asking them signals you are evaluating the fit rather than only hoping to be chosen.
Common Questions
How much notice do you get? Usually enough to prepare, though notice varies and some visits are arranged at short notice.
Who should be present? The owner or manager who can answer process and capacity questions, plus normal staff doing normal work.
Should I stop production during the visit? No. A working shop is more persuasive than an idle one, and an unusually quiet floor is noticeable.
What disqualifies a shop on site? Declared capability that does not exist, safety or environmental problems, and an operation visibly inconsistent with the application.
Do they check documentation on site? Frequently yes, often on a repair order they select. Be able to open any current job immediately.
Open any claim file in seconds, including the one they pick
See how Claimory helps collision shops manage claims, track supplements, and improve operations.
More on Collision Shop Operations
Continue exploring insights and strategies in this category.
Why DRP Applications Get Rejected, and How to Fix Yours
Most DRP rejections are never explained. Some are about your shop and some have nothing to do with it. Here is how to tell the two apart, what to fix, and when reapplying is worth the effort.
How to Hire a Collision Estimator
A collision estimator sits at the center of a shop's revenue and customer experience, so hiring the right one matters enormously. Here is what to look for and how to approach the hire.
Building Productive Insurance Carrier Relationships
Good carrier relationships mean faster approvals, easier supplements, and better referrals. Bad relationships mean constant friction. Here's how shops build productive partnerships with insurance companies.